Setup > Video & Audio > Setup > Video > Stream

- - The expected codec usage :

- Go to Profile Configuration

Stream Profile List
- - Name
  - Description
  - Stream1
  - Stream2

Stream
- - Enable streaming
- - Video codec :
- - Resolution :
  NOTE: If a vertical resolution of 1080P is selected, other video streams cannot support a horizontal resolution higher than 1088.
  
  Note: Image rotation is disabled with the resolution of QQVGA(160x120).
- - Max. FPS :
  - (1 ... 30 fps)
- - GOP :
  - (1 ... 30)
- - Profile identification :
- - Bit rate control
- - Variable bitrate (VBR)
  - Maximum bitrate :
  - (128 ... 12000 kbps)
  - Image quality :
- - Constant bitrate (CBR)
  - Target bitrate :
  - (128 ... 8000 kbps)
- - JPEG quality :
  - (0 ... 100 Best quality is '100')

Stream
- - Enable streaming
- - Video codec :
- - Resolution :
  NOTE: If a vertical resolution of 1080P is selected, other video streams cannot support a horizontal resolution higher than 1088.
  
  Note: Image rotation is disabled with the resolution of QQVGA(160x120).
- - Max. FPS :
  - (1 ... 30 fps)
- - GOP :
  - (1 ... 30)
- - Profile identification :
- - Bit rate control
- - Variable bitrate (VBR)
  - Maximum bitrate :
  - (128 ... 12000 kbps)
  - Image quality :
- - Constant bitrate (CBR)
  - Target bitrate :
  - (128 ... 8000 kbps)
- - JPEG quality :
  - (0 ... 100 Best quality is '100')

Warning: VCA Enabled
- The second stream cannot be configured if VCA is enabled.
  This is due to hardware constraints of the camera.
  Go to the VCA Enabled/Disabled page to disable VCA.

Snapshot
- - Enable snapshot
- - Resolution :
  NOTE: If a vertical resolution of 1080P is selected, other video streams cannot support a horizontal resolution higher than 1088.
  
  Note: Image rotation is disabled with the resolution of QQVGA(160x120).
- - Max. FPS :
  - (1 ... 5 fps)
- - JPEG quality :
  - (0 ... 100 Best quality is '100')

Audio Input
- - Enable
- - Source :
  - MIC Line-in
- - Volume :
  - (0 ... 255)
- - Codec :
- - Sampling frequency :

Audio Output
- - Enable
- - Volume :
  - (0 ... 255)
- - TCP/IP listen port :
  - (1 ... 65535, 6000)